Built Primarily on a Winchester M-70 controlled round feed claw extract action.

All actions are double square bridged offering and accurate return to zero scope mounting.

One set of Talley allen cap head or double lever rings are supplied with each rifle.

We strengthen the exposed ring lug surface by adapting an underlug to each ring.

The original factory interrupted thread is reamed out and recut on center to 1 1/16" x 16 TPI.

The lug surface is recut. The receiver ring is trued, the bolt face is recut and trued on center.

The lugs are then hand lapped and the working surfaces are honed and polished.

The bolt release pad is built up and checkered. The bolt assembly is jeweled.

The trigger is done to the customer's requested weight of pull.

 

 The action is assembled with Grizzel style one piece bottom metal by Sunny Hill Enterprises.

It includes a metal hinged floor plate.

 

Premium Grade, Krieger Cut Rifled Barrels are cryo treated.

Chambers can be cut in all standard or wildcat cartridges the actions will accept.

 

  The metal is finished in a satin blue.

 

When you select one of our premium stocks blanks we include the turning cost or you can furnish your own blank.

You can also choose one of our laminated stock woods.

 

An ebony forend tip is installed. Cross bolts and ebony plugs are installed when necessary.

A 6/10" or 1" Pachmeyer decelerator pad is installed at customer's desired length of pull.

The stock is pillar bedded and fiberglass reinforced.

 

Our screwless machined metal grip cap and a 2 screw front and rear metal sling swivel studs are installed.

 

The stock is finished in satin Oil and then checkered in a standard point pattern,

with a wrap around  forearm and a 3 panel grip at 24 lines per inch.

 

 

 

 

 

 

Also Available In Left Handed

 

This action is built on the Dakota African Action-which will handle the largest African cartridges,

as an example: a .416 Rigby, etc. The magazine length is 3.85".

 

This rifle is built in the deep box fashion adding an extra round to the magazine.

 

The rifle is barreled with an Integral Barrel. The barrel is machined with a quarter rib, barrel lug,

barrel band sling swivel stud and barrel band front sight.

 

Installed is a rear sight with one leaf standing and one leaf folding,

a front sight bead and a detachable sight hood.

 

These stocks are tailored to the heavy side following traditional lines

accommodating the magnums of the Safari Hunting rifles.

 

Finished weight approx. 10 1/4 lbs.

 

PRICE: $19,750.00.

 

 

 

 

 

 

Also Available In Left Handed

 

This rifle is built in the deep box fashion adding an extra round to the magazine.

 

The rifle is barreled with an Integral Barrel. The barrel is machined with a quarter rib, barrel lug,

barrel band sling swivel stud and barrel band front sight.

 

Installed is a rear sight with one leaf standing and one leaf folding,

a front sight bead and a detachable sight hood.

 

These stocks are tailored to the heavy side following traditional lines

accommodating the magnums of the Safari Hunting rifles.

 

◊ Finished weight approx. 9 1/2 lbs.

 

◊ PRICE: $19,000.00.

 

 

 

 

 

 

Also Available In Left Handed

 

This rifle is tailored after the familiar classic hunting rifle.

 

Finished weight using No.3 contour barrel, blind box approx.7 1/2 lbs,

standard box approx. 8 lbs.

 

PRICE: Standard Box & Blind Box $16,500.00.